IGBT History, Design, and Impact on Power Electronics
The Insulated-Gate Bipolar Transistor (IGBT) is a crucial component in power electronics, enabling precise control over high power levels. It has significantly impacted various sectors, including energy generation, electric vehicles (EVs), transportation, and industry. The IGBT is unique because it combines characteristics of both Bipolar Junction Transistors (BJTs) and MOSFETs.
The Dawn of Power Semiconductors
Power electronics manage the flow of electrical power, and at their core are power semiconductors. These semiconductors act as switches, similar to those in a CPU, but they handle much larger currents. Unlike mechanical switches, power semiconductors offer several advantages: - Durability: They lack moving parts, leading to a longer lifespan. - Efficiency: They operate silently and can switch at extremely high speeds (thousands to millions of times per second).
These advancements in power semiconductors have been instrumental in commercializing many life-changing inventions, yet their importance often goes unrecognized. A good power switch needs to be highly conductive when ON (like a metal) and an effective insulator when OFF, with the ability to toggle between these states very quickly.
The Legendary Thyristor
The field of power semiconductors began about 70 years ago with the silicon thyristor. This device consists of four alternating P and N-type layers (PNPN) and has three terminals: an anode, cathode, and gate. - Operation: By default, the thyristor's gate is closed. A small current applied to the gate opens it, allowing current to flow from the anode to the cathode in one direction. - Limitations: Introduced by General Electric as the Silicon Controlled Rectifier, the thyristor's main drawback is its "latching" behavior. Once turned on, it continues to conduct until the anode current drops to zero or below a certain threshold. This is suitable for AC-to-DC rectification, but for DC applications, additional circuitry is needed to force the current down, consuming power and space.
This limitation spurred the development of new power semiconductors that could be turned on and off at will, such as the Gate Turn-Off Thyristor, which offered on-demand switching at the expense of speed.
Power Bipolar Junction Transistors (BJTs)
Power BJTs were among the first practical transistors. They have three sections: emitter, base, and collector. An input current to the base controls a larger current between the collector and emitter. - Advantages: Power BJTs can switch on and off at will using the base current. - Disadvantages: - Current-controlled: They require a continuous base current to stay on, consuming energy. - Speed: They are not particularly fast and take extra time to turn off due to "conductivity modulation." BJTs are "bipolar" devices, relying on both minority and majority carriers. When an NPN BJT is on, electrons (minority carriers) are injected into the P-type base. To turn off the device, these injected minority carriers must be flushed out, which takes time. - Ruggedness: They are prone to overheating and often require additional protection circuitry, adding bulk.
Power MOSFETs
The issues with BJTs led to the development of Power MOSFETs in the late 1970s. Unlike BJTs, MOSFETs are majority carrier (unipolar) devices, using the field effect to control conductivity. - Early Limitations: Initial MOSFETs were limited to low-power signal switching (less than a watt). - Vertical Structures: This changed with the introduction of vertical structures like the Vertical Diffused MOS or Vertical MOS. Unlike lateral signal MOSFETs where all terminals are on the same plane, vertical MOSFETs place the gate and source at the top and the drain at the bottom of the silicon bulk. - Advantages: - Voltage-controlled: They are controlled by voltage rather than current. - Speed: They switch much faster than BJTs. - Ruggedness: They are more robust. - Disadvantage: Power MOSFETs do not handle high voltages as effectively as power BJTs, making them unsuitable for high-power applications like EVs or locomotives, though they are excellent for smaller devices like personal computers.
Baliga and the Birth of the IGBT Concept
In 1974, B. Jayant Baliga, an Indian-American researcher at General Electric, was assigned to work on power semiconductors, a field he initially considered mature and unexciting. - Thyristor Work: He began with thyristor technology. After a Japanese professor, Jun-ichi Nishizawa, announced the "static induction thyristor" in 1975, GE tasked Baliga with creating a similar device. While he succeeded in producing these thyristors, they exhibited default-ON behavior, making them unsuitable for power applications. - The Hybrid Idea: Reflecting on the trade-offs between power BJTs and power MOSFETs, Baliga wondered if a voltage-controlled power semiconductor could combine the switching speed and resilience of a MOSFET with the high-power handling capabilities of a BJT. This led to the idea of merging the two.
The IGBT: A Hybrid Device
The IGBT aims to combine the best features of both MOSFETs and BJTs. It's not merely a BJT and a MOSFET wired together but an integrated structure. - Structure: The IGBT has three terminals: a collector, emitter (from the BJT), and a gate (from the MOSFET). The collector is at the bottom. - Off State: When off, no electrons flow from emitter to collector. A thick, lightly doped drift region blocks high voltages. - On State (N-channel IGBT example): 1. MOSFET Action: As voltage is applied to the gate, electrons are attracted to the P-type body region beneath the gate. When the gate voltage exceeds a threshold, an "inversion layer" forms, creating a conductive path (the "MOSFET" part) for electrons to flow from the emitter to the N-type drift region. 2. Bipolar Action: This electron flow acts like a current supplied to the base of a PNP BJT, triggering "minority carrier injection." Electron holes are injected from a P-type layer above the collector into the N-type drift region. 3. Conductivity Modulation: The combination of electrons and holes in the drift region creates "conductivity modulation," significantly reducing resistance and allowing a large current to flow. - Off State (Turning Off): Lowering the gate voltage below its threshold closes the electron flow. However, like BJTs, removing the injected minority carriers from the drift region takes time, leading to a similar switching speed limitation.
GE and the IGT
Baliga first documented his MOSFET-BJT hybrid idea in 1977 and published it in Electronics Letters in September 1979. - GE's Motivation: A GE VP, seeking a replacement for power BJTs in adjustable speed drives for heat pumps and air conditioners, challenged the research team to innovate. Baliga pitched his hybrid device, highlighting its broad applications. - Commercialization: GE fast-tracked the device in late 1980, with the first wafers produced in August 1981. Baliga publicly presented it at IEDM 1982, calling it the "Insulated Gate Rectifier." It was commercialized in June 1983 as the "Insulated Gate Transistor" (IGT) and received Electronic Products' Product of the Year award.
RCA and the COMFET
Concurrently, Carl F. Wheatley and Hans Becke at RCA were developing a similar concept. Wheatley aimed to create a power MOSFET with bipolar action for high current density. They filed a patent in March 1980, which was granted later. In 1983, RCA commercialized their device as the COMFET.
The Latch-up Issue
Both early IGBTs (IGR, IGT, COMFET) suffered from a critical flaw: latch-up. - Mechanism: The IGBT's PNPN structure is similar to a thyristor, which is prone to latching. Every IGBT contains an unwanted, parasitic NPN BJT. When holes are injected from the P-type collector through the N-type drift and P-type body to the emitter metal, this sideways current flow creates a voltage drop. If this drop is high enough, it can accidentally trigger the parasitic NPN BJT. This, in conjunction with the normal PNP BJT, creates a self-sustaining loop, preventing the device from turning off and potentially leading to thermal runaway. - Baliga's Solution: Baliga addressed this by introducing a "Deep P+" region of doped silicon to limit hole flow and make latch-up harder. He also used irradiation to create lattice defects that trapped electrons, speeding up switching. These innovations allowed GE to introduce new adjustable speed motors for air conditioners and tailor IGRs for various applications.
Nakagawa's Breakthrough
When the IGR was demonstrated in 1982, many Japanese companies, including Toshiba, were skeptical. Akio Nakagawa, a Toshiba scientist, initially doubted the device's utility due to its slow switching speed. However, he later recognized its potential for high-current applications that could tolerate slower speeds. - The Problem: Early IGBTs had a high saturation current limit, making them susceptible to latch-up, especially at high temperatures. This forced system designers to operate within a narrow safe range. - Nakagawa's Insight: In early 1983, tasked with integrating a bipolar and MOSFET, Nakagawa devised a brilliant solution: he lowered the device's saturation current to below its latch-up current limit. This ensured that the device would reach its maximum current capacity before latching up, making its behavior consistent across its entire operating range. - Impact: Toshiba began selling these new IGBTs in 1985. Their consistent behavior led to their rapid adoption, replacing power BJTs and MOSFETs in many medium and high-voltage converter applications.
The Question of Invention
The invention of the IGBT is complex due to independent developments and nuanced claims. - Early Concepts: The basic idea of combining bipolar and MOSFET structures (sometimes called Bi-FETs) existed earlier. K. Yamagami of Mitsubishi filed a Japanese patent in 1968 for a PNP bipolar transistor driven by a MOSFET. In 1978, Jim Plummer and Scharf of Stanford University published work on a MOSFET controlling a TRIAC. - Baliga's Contributions: Baliga published his idea first (1979) and brought an IGR to market first (1982). He was a strong advocate for the device and continued to refine it, filing over 20 patents to address initial latching and slow-switching issues. He also authored a comprehensive textbook, "The IGBT Device." - RCA's Contributions: RCA's patent by Becke and Wheatley was filed early (1980) and claimed no latch-up behavior across the full operating range. This contrasts with Baliga's 1979 device, which exhibited "thyristor-like" performance at higher currents. - Nakagawa's Contribution: Nakagawa's non-latch-up IGBT had a major impact on the industry. He attributes the true invention to Becke, believing that a "real" IGBT must not latch up across its entire operating range. - Shared Credit: Similar to the invention of the integrated circuit (Jack Kilby vs. Bob Noyce and Jean Hoerni), the credit for the IGBT is often shared. Baliga is widely recognized as the inventor or co-inventor, receiving numerous awards. Nakagawa's contribution in developing a non-latch-up IGBT is also universally acknowledged.
Conclusion
The IGBT has profoundly impacted modern technology. - Household Appliances: IGBTs are found in washing machines, refrigerators, and cookers. A notable application is in air conditioners, where they enable variable motor speeds for energy-efficient temperature maintenance. - New Energy Economy: They are crucial for modern wind turbines, facilitating the conversion of variable AC power to DC for storage and vice versa. - Electric Vehicles: IGBTs are core components in EV motor drives.
While new power semiconductors made from wide bandgap materials like silicon carbide and gallium nitride are emerging, silicon IGBTs continue to dominate mid-level power applications, demonstrating the enduring legacy of silicon power technology.
Takeaways
- The IGBT merges MOSFET voltage control with BJT high‑current capability, using an inversion layer for electron flow and bipolar conductivity modulation to achieve low on‑resistance.
- B. Jayant Baliga conceived the hybrid device in the 1970s, documented it in 1979, and led GE to commercialize the first IGBT (originally called the Insulated Gate Transistor) by 1983.
- Early IGBTs suffered from latch‑up due to a parasitic thyristor structure, which Baliga mitigated by adding a deep‑P+ region and irradiation‑induced traps to suppress the unwanted NPN turn‑on.
- Akio Nakagawa’s breakthrough lowered the device’s saturation current below the latch‑up threshold, guaranteeing that the IGBT could reach its full current rating without entering a self‑sustaining latch state, which drove rapid market adoption.
- Today IGBTs power household appliances, wind turbines, and electric‑vehicle drives, and despite emerging SiC and GaN devices, silicon IGBTs remain dominant in mid‑range power applications.
Frequently Asked Questions
What is latch-up in IGBTs and how was it solved?
Latch-up is a parasitic thyristor action where the internal NPN transistor turns on, creating a self‑sustaining current loop that prevents the device from turning off and can cause thermal runaway. Baliga solved it by adding a deep‑P+ region to block hole flow and using irradiation to create traps that speed carrier removal, eliminating the unwanted loop.
Why did Nakagawa’s low saturation current design improve IGBT reliability?
Nakagawa reduced the IGBT’s saturation current to stay below the latch‑up current limit, ensuring the device reaches its maximum usable current before any parasitic turn‑on can occur. This prevented latch‑up across the full operating range, giving consistent behavior and allowing wider adoption in medium‑ and high‑voltage converters.
Who is Asianometry on YouTube?
Asianometry is a YouTube channel that publishes videos on a range of topics. Browse more summaries from this channel below.
Does this page include the full transcript of the video?
Yes, the full transcript for this video is available on this page. Click 'Show transcript' in the sidebar to read it.
of Invention The invention of the IGBT is complex due to independent developments and nuanced claims. - **Early Concepts:** The basic ide
of combining bipolar and MOSFET structures (sometimes called Bi-FETs) existed earlier. K. Yamagami of Mitsubishi filed a Japanese patent in 1968 for a PNP bipolar transistor driven by a MOSFET. In 1978, Jim Plummer and Scharf of Stanford University published work on a MOSFET controlling a TRIAC. - Baliga's Contributions: Baliga published his idea first (1979) and brought an IGR to market first (1982). He was a strong advocate for the device and continued to refine it, filing over 20 patents to a
Helpful resources related to this video
If you want to practice or explore the concepts discussed in the video, these commonly used tools may help.
Links may be affiliate links. We only include resources that are genuinely relevant to the topic.