Ionic and Electronic Conduction in Amorphous Materials

•

 73 min video

•

 4 min read

YouTube video ID: y-0r4c_VhhE

Source: YouTube video by MIT OpenCourseWare — Watch original video

PDF

Let's delve into the electrical and transport properties of amorphous materials, focusing on ionic and electronic conduction.

Fundamentals of Electrical Conduction

Electrical conduction occurs when an electric field is applied to a material, causing charged particles to move. These particles can be positively charged ions, negatively charged ions, or electrons. While they move in opposite directions under an electric field, both contribute positively to electrical conductivity.

The electrical conductivity ($\sigma$) is given by the equation: $\sigma = n Z e \mu$

Where: - $n$: Concentration of charged carriers - $Z$: Charge number (valency) - $e$: Elementary charge - $\mu$: Mobility

It's crucial to remember that regardless of the charge's sign (positive or negative), the contribution to electrical conductivity is always positive. This is because current direction aligns with the electric field, and when summing contributions, the squared charge number ($Z^2$) ensures a positive total conductivity.

The velocity ($v$) of charged particles is a product of mobility and electric field: $v = \mu E$. In notation, a bold 'v' denotes velocity (a vector), while 'nu' ($\nu$) represents frequency.

Einstein Relation

The Einstein relation links the diffusion coefficient ($D$) and mobility ($\mu$): $D = \frac{\mu k_B T}{Z e}$

Where: - $k_B$: Boltzmann constant - $T$: Absolute temperature

This relationship is fundamental because both diffusion and mobility describe how charged particles move under external forces. Diffusion occurs due to a concentration (chemical potential) gradient, while mobility describes movement under an electric field. Both are related to the particle's inherent mobility and the external force.

Combining these concepts, the total electrical conductivity in a material is the sum of contributions from each individual charged species: $\sigma = \sum_i n_i Z_i^2 e^2 \frac{D_i}{k_B T}$

The $Z_i^2$ term again highlights that both positive and negative charges contribute positively to the overall conductivity.

Ionic Conduction in Amorphous Materials

In crystalline materials, ionic conduction typically occurs via vacancy mechanisms (ions swapping with neighboring vacancies) or interstitial mechanisms (ions moving between interstitial sites). However, in amorphous materials, precisely defining lattice sites and vacancies is difficult due to the lack of a regular crystalline structure.

Instead, in amorphous materials, ions occupy "preferred locations" or "low-energy sites." These sites offer low energy when ions populate them. Electrical conduction then becomes an ion-hopping process between these low-energy sites. These sites are not periodic, as illustrated by the distribution of lithium ions in silicate glass, where increasing lithium concentration increases the density of these sites, but they remain separated.

For an ion to move across the material, it must hop from one low-energy site to another, overcoming energy barriers in between. This makes ionic conduction a thermally activated process, where ions need to acquire sufficient energy to surmount these barriers.

Modeling Ionic Conductivity: Random Walk Theory

To model ionic conductivity, we consider ions hopping between two neighboring low-energy sites separated by an energy barrier, $E$. Due to the statistical nature of glass structures, parameters like well depths and energy barriers are considered ensemble averages across the material, unlike the well-defined values in crystalline materials.

We can derive ionic conductivity using random walk theory. The average distance an ion moves, $r$, is correlated with the distance of each hop, $d$ (separation between neighboring low-energy sites), and the total number of hops, $M$: $r = d \sqrt{M}$

The average diffusion distance is also defined by the diffusion coefficient ($D$) and time ($\tau$): $r = \sqrt{2 D \tau}$ (for 1D diffusion) $r = \sqrt{6 D \tau}$ (for 3D diffusion)

Combining these for a 1D case: $d \sqrt{M} = \sqrt{2 D \tau}$ Squaring both sides: $d^2 M = 2 D \tau$ $D = \frac{1}{2} \frac{M}{\tau} d^2$

Here, $M/\tau$ represents the frequency of atomic hops. We introduce $\nu$ as the frequency of successive ionic hops between neighboring low-energy sites. So, the diffusion coefficient can be simplified to: $D = \frac{1}{2} \nu d^2$ (for 1D) $D = \frac{1}{6} \nu d^2$ (for 3D)

To calculate ionic conductivity, we need to predict the frequency of these successive hops ($\nu$). This is a thermally activated process. An ion vibrates at a low-energy site with a vibrational frequency $\nu_0$. Each vibration is an attempt to overcome the energy barrier and hop to a neighboring site. The probability of a successful hop (having enough energy) is given by the Boltzmann factor.

According to the Arrhenius law, the frequency of successful hops ($\nu$) is given by the attempt frequency ($\nu_0$) multiplied by the Boltzmann factor: $\nu = \nu_0 \exp\left(-\frac{E}{k_B T}\right)$

Where $E$ is the energy barrier.

  Takeaways

  • Electrical conductivity is always positive because contributions from both positive and negative charge carriers are squared (Z²) in the conductivity formula.
  • The Einstein relation links the diffusion coefficient and mobility, showing that both diffusion and mobility describe particle motion under concentration gradients and electric fields.
  • In amorphous materials, ions occupy low‑energy, non‑periodic sites and conduct via thermally activated hopping between these sites rather than through crystal lattice vacancies.
  • Random‑walk theory relates ionic diffusion to hop distance, frequency, and dimensionality, yielding D = (1/2)νd² for 1D and D = (1/6)νd² for 3D diffusion.
  • The hop frequency follows an Arrhenius expression ν = ν₀ exp(−E/kBT), where ν₀ is the vibrational attempt frequency and E the energy barrier, making ionic conductivity temperature‑dependent.

Frequently Asked Questions

Why does the Z² term ensure a positive contribution to conductivity from both positive and negative ions?

The Z² term squares the ionic charge number, eliminating any sign information. Because conductivity depends on Z² e², both cations (positive Z) and anions (negative Z) produce the same positive factor, so each species adds positively to the total electrical conductivity.

How does random walk theory relate the hop distance and frequency to the diffusion coefficient in ionic conduction?

Random‑walk theory treats ionic motion as a series of hops of length d occurring at frequency ν. For one‑dimensional diffusion the mean squared displacement equals d²M, leading to D = (1/2)νd²; in three dimensions the factor becomes 1/6. This links hop parameters directly to the diffusion coefficient used in conductivity calculations.

Who is MIT OpenCourseWare on YouTube?

MIT OpenCourseWare is a YouTube channel that publishes videos on a range of topics. Browse more summaries from this channel below.

Does this page include the full transcript of the video?

Yes, the full transcript for this video is available on this page. Click 'Show transcript' in the sidebar to read it.

Helpful resources related to this video

If you want to practice or explore the concepts discussed in the video, these commonly used tools may help.

Links may be affiliate links. We only include resources that are genuinely relevant to the topic.

Full transcript is not shown on this page

This page focuses on the summary and original notes. For full verification, refer to the original YouTube video.

PDF